Remove Network Cable Tester MS6811
Key Specifications / Features
Model No.: MS6811 Hits: 0
The network cable tester is a small hand-held cable tester ,which enables network professionals to quickly and easily verify the integrity of Ethernet twisted pair cables.
Tags:
Next: Wire Tracker MS6812
Previous: Multi-Network Cable Tester MS6810
Detail Infomation
♦Test device used with UTP ( Un-shield Twisted Pair) and STP ( Shield Twisted Pair) wiring.
♦Check continuity and configuration of wire with unshield and shield module plugs.
♦Tests open circuits shorts, mis-wires, reversals and split pairs.
♦Shield detection tests a cable's shield integrity.
♦Main unit and one remote allow one to test T568A, T568B,10Base-T, and Token ring.
♦Debug quickly identify which cable pairs have a specific wiring fault.
♦6 volt battery is installed in the main tester ( Remote unit is un-powered)
♦Battery low indicator.
♦Cable length: Min: 0.4 m, Max: over 200m
♦Size:125 X 55X30 mm
♦Weight: 125g
♦Check continuity and configuration of wire with unshield and shield module plugs.
♦Tests open circuits shorts, mis-wires, reversals and split pairs.
♦Shield detection tests a cable's shield integrity.
♦Main unit and one remote allow one to test T568A, T568B,10Base-T, and Token ring.
♦Debug quickly identify which cable pairs have a specific wiring fault.
♦6 volt battery is installed in the main tester ( Remote unit is un-powered)
♦Battery low indicator.
♦Cable length: Min: 0.4 m, Max: over 200m
♦Size:125 X 55X30 mm
♦Weight: 125g
